Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
Next revision
Previous revision
install:guides:linux [2013/10/01 22:27]
doc
install:guides:linux [2021/08/26 21:36] (current)
doc
Line 9: Line 9:
 ==== Linux Installation Guide ==== ==== Linux Installation Guide ====
  
-This guide describes how to install and license the Omnidex software on a Linux operating system.+This guide describes how to install and license the Omnidex software on a Linux operating system. ​ The Omnidex installation performs the following tasks:
  
-=== 1Remove any previous installations of Omnidex ​===+  - Copy the Omnidex files into /​opt/​omnidex directory. 
 +  - Create symbolic links in /usr/bin for odxsql, odxnet, omnidex, and odxversions. 
 +  - Create omnidex.conf file in /​etc/​ld.so.conf.d directory. ​ The file omnidex.conf contains the path to the Omnidex ​libraries (/​opt/​omnidex/​lib).
  
-If a previous version ​of Omnidex ​has been installed, please remove this version of the software before proceeding.  ​+There are two methods ​of installing ​Omnidex.  Many system administrators like to use the '​yum'​ facility to automatically install Omnidex.  ​Others will prefer to manually download and install the RPM files. ​ Both approaches are supported.
  
-Note that if you have installed Omnidex on databases, it is not necessary to remove the Omnidex indexes on those databases before installing a new version of Omnidex. ​ The existing indexes may be able to be reused.+=== Automatic installation ===
  
-=== 2Downloading the software ===+== 1Log on as root ==
  
-[[install:​downloads:​home|Download]] ​the software from the Downloads tab in this documentation.  ​Be sure to choose correctly between the 32-bit and 64-bit versions of the software.+Omnidex should be installed using the '​root'​ system user.  ​Alternatively,​ Omnidex can be installed with the sudo command.
  
-Omnidex is available as an RPM file or as a TAR file Both installations contain ​the same Omnidex ​software.+== 2Make sure that the Omnidex ​repository is installed on your server == 
  
-=== 3Log on as root ===+The Omnidex repository must be copied to your system. ​ The following Linux command will copy the Omnidex repository file.
  
-Omnidex should be installed using the '​root'​ system user.+For Red Hat or CentOS 6.x versions:
  
-=== 4Install the Omnidex RPM file ===+  # wget http://www.omnidex.com/​downloads/​omnidex/​Linux/​el6/​omnidex.repo -P /​etc/​yum.repos.d
  
-Omnidex is most easily installed using the RPM format. ​ While logged on as the '​root'​ user, use the rpm command to install the software.+ 
 +For Red Hat or CentOS 5.x versions: 
 + 
 +  # wget http://​www.omnidex.com/​downloads/​omnidex/​Linux/​el5/​omnidex.repo -P /​etc/​yum.repos.d 
 + 
 + 
 +For SuSE versions: 
 + 
 +  # wget http://​www.omnidex.com/​downloads/​omnidex/​Linux/​el6/​omnidex.repo -P /​etc/​zypp/​repos.d 
 +   
 + 
 +== 3. Choose whether to use the latest stable version or the current development version ==  
 + 
 +By default, yum will install the latest stable version of Omnidex, suitable for production applications. ​ If you would like to access the most recent development version or a previous version of Omnidex, you must edit the Omnidex repository.  
 + 
 +The repository contains three sections:  
 + 
 +  * [omnidex] - The most recent stable version of Omnidex, suitable for production applications. 
 +  * [omnidex-devel] - The most recent development version of Omnidex containing the latest features and bug fixes. 
 +  * [omnidex-arch] - An archive of previous versions of Omnidex. 
 + 
 +Choose which section you want to activate by setting "​enabled = 1" for that section and "​enabled = 0" for all other sections. 
 + 
 +== 3. Install Omnidex == 
 + 
 +For Red Hat or CentOS versions: 
 + 
 +Once the Omnidex repository is copied, Omnidex can be automatically installed using the command: 
 + 
 +  # yum install omnidex 
 +   
 +You can update an existing version of Omnidex using the command: 
 + 
 +  # yum update omnidex 
 + 
 +You can remove an existing version of Omnidex using the command: 
 + 
 +  # yum remove omnidex 
 + 
 +If your repository is set to [omnidex-arch] as described above, you can view all available versions and install a particular version using the commands: 
 + 
 +  # yum list --showduplicates omnidex 
 +  # yum install omnidex-<​version> ​ (eg. yum install omnidex-5.3-08D.el6.linux) 
 + 
 +Note: To install an earlier version of Omnidex than the version currently installed, first remove Omnidex and then clear the yum cache. 
 + 
 +  # yum remove omnidex 
 +  # yum clean metadata 
 + 
 +For SuSE versions: 
 + 
 +Once the Omnidex repository is copied, Omnidex can be automatically installed using the command: 
 + 
 +  # zypper install omnidex 
 +   
 +You can update an existing version of Omnidex using the command: 
 + 
 +  # zypper update omnidex 
 + 
 +You can remove an existing version of Omnidex using the command: 
 + 
 +  # zypper remove omnidex 
 + 
 +If your repository is set to [omnidex-arch] as described above, you can view all available versions and install a particular version using the commands: 
 + 
 +  # zypper packages omnidex 
 +  # zypper install omnidex-<​version> ​ (eg. zypper install omnidex-5.3-08D.el6.linux) 
 + 
 +Note: To install an earlier version of Omnidex than the version currently installed, first remove Omnidex and then clear the yum cache. 
 + 
 +  # zypper ​ remove omnidex 
 +  # zypper ​ clean  
 + 
 +=== Manual installation === 
 + 
 +== 1. Log on as root == 
 + 
 +Omnidex should be installed using the '​root'​ system user.  Alternatively,​ Omnidex can be installed with the sudo command. 
 + 
 +== 2. Remove any previous non-RPM installations of Omnidex == 
 + 
 +If a previous version of Omnidex has been installed without using RPM, please remove this version of the software before proceeding. ​  
 + 
 +Note that if you have installed Omnidex on databases, it is not necessary to remove the Omnidex indexes on those databases before installing a new version of Omnidex. ​ The existing indexes may be able to be reused. 
 + 
 +== 3. Download the software == 
 + 
 +[[install:​downloads:​home|Download]] the software from the Downloads tab in this documentation. ​ Be sure to choose correctly the version of Omnidex that matches your version of Linux. 
 + 
 +Omnidex is available as an RPM file or as a TAR file.  Both installations contain the same Omnidex software. 
 + 
 +== 4. Install the Omnidex RPM file == 
 + 
 +Omnidex is most easily installed using the RPM format. ​ While logged on as the '​root'​ user, use the rpm command to install the software.  Note that the exact filename will be different for each version of Omnidex.
  
 <​code>​ <​code>​
-  # rpm -ivf omnidex-5.3-07H.el6.linux.x86_64.rpm ​                                  +  # rpm -Uvf omnidex-5.3-07H.el6.linux.x86_64.rpm ​                                  
   Preparing packages for installation...   Preparing packages for installation...
   omnidex-5.3-07H.el6.linux   omnidex-5.3-07H.el6.linux
-  #  
 </​code>​ </​code>​
  
-The Omnidex installation performs the following tasks: 
  
-  - Copy the Omnidex files into /​opt/​omnidex directory. +=== Prepare Omnidex for use with Java (optional) ===
-  - Create symbolic links in /usr/bin for odxsql, odxnet, omnidex, and odxversions. +
-  - Create omnidex.conf file in /​etc/​ld.so.conf.d directory. ​ The file omnidex.conf contains the path to the Omnidex libraries (/​opt/​omnidex/​lib). +
- +
-=== 5. Prepare Omnidex for use with Java (optional) ===+
  
 To use Omnidex with Java, you must set these environment variables: To use Omnidex with Java, you must set these environment variables:
  
 <​code>​ <​code>​
-  export LD_LIBRARY_PATH="​opt/​omnidex/​lib:​$LD_LIBRARY_PATH"​ 
   export CLASSPATH="/​opt/​omnidex/​lib/​Omnidex.jar:​$CLASSPATH"​   export CLASSPATH="/​opt/​omnidex/​lib/​Omnidex.jar:​$CLASSPATH"​
 +  export LD_LIBRARY_PATH="​opt/​omnidex/​lib:​$LD_LIBRARY_PATH"​
 +  export LD_PRELOAD="<​see below>"​
 </​code>​ </​code>​
  
 To use OdxSQL as a Java client for testing purposes, you also must add the directory containing libjvm.so to LD_LIBRARY_PATH. To use OdxSQL as a Java client for testing purposes, you also must add the directory containing libjvm.so to LD_LIBRARY_PATH.
 +
 +Additionally,​ it is recommended to set LD_PRELOAD to Java's libjsig.so library due to known compatibility issues with Java's signal handling with other applications,​ including Omnidex. This is necessary to avoid unexplained aborts of the JVM when connecting to Omnidex processes, such as when setting up application pooling using DBCP. Instructions for setting this variable can be found at the following link:
 +
 +https://​docs.oracle.com/​javase/​8/​docs/​technotes/​guides/​vm/​signal-chaining.html
 +
 +
 +=== Install Omnidex to run as a service (optional) ===
 +
 +Omnidex is usually run as a service, though it can be run in a console window as well.  The files needed to set up Omnidex as a service are automatically placed in /etc/init.d upon installation.  ​
 +
 +The following commands are available to manage the Omnidex service:
 +
 +<​code>​
 +  systemctl start omnidexd ​        ​(start omnidex as a service)
 +  systemctl stop omnidexd ​         (stop omnidex as a service)
 +  systemctl restart omnidexd ​      ​(restart omnidex as a service)
 +  systemctl status omnidexd ​       (check if omnidex is running as a service)
 +</​code>​
 +
 +To manage whether the Omnidex service starts every time the system is rebooted, use the following commands:
 +
 +<​code>​
 +  chkconfig --add omnidexd ​     (add omnidex service to startup)
 +  chkconfig --del omnidexd ​     (remove omnidex service from startup)
 +  chkconfig --list omnidexd ​    ​(check if omnidex service is in the startup)
 +</​code>​
 +
 +----
  
 ====  ==== ====  ====
-/ +\\ 
-/+
 If you have any difficulty installing Omnidex on your Linux operating system, please contact [[appendix:​contactus|Technical Support]] for assistance. If you have any difficulty installing Omnidex on your Linux operating system, please contact [[appendix:​contactus|Technical Support]] for assistance.
  
 
Back to top
install/guides/linux.1380666429.txt.gz · Last modified: 2016/06/28 22:38 (external edit)